Sbp Pressure Balanced Cage and Port Guiding Parabolic Plug Type Control Valve

Product Description

SBP Pressure Balanced Cage and Port Guiding Parabolic Plug Type

SBP series has both optional structures of metal and soft sealing. Combined with complex piston rings, SBP presents excellent seal performance. The series with balanced trims requires much lower control forces than valves without balancing for very high pressure drops. Parabolic column plug ensure large rangebility, precise flow characteristics and not being locked.

SBP series is best suitable to large pressure drop ratio, wide temperature change and particle conditions, etc.

Standard Specification
Valve Body
Type: Cast globe Valve
Nominal Size: DN 80, 100, 150, 200, 250, 300, 350, 400
Nominal Pressure: ANSI 150, 300
DIN PN16, 25, 40
JIS 10K, 20K, 30K
GB PN1.6, 2.5, 4.0 MPa
End Connection: Flange ANSI B16.5 RF, RTJ
DIN2543/2544/2545 RF
JISB2201 RF
JB/T81 RF
JB/T82.2 FM
Weld: ANSI B16.5 SW(DN≤ 50); BW(DN>50)

Face to Face Dimension:
ANSI150RF, JIS10K (IEC60534-3-1 37 Series)
ANSI300RF, JIS20K, JIS30K (IEC60534-3-1 38 Series)
ANSI150/300 RTJ (ASME B16.10 CLASS 150/300RTJ)
DIN PN16, 25, 40 (DIN3202-F1)
GB PN1.6, 2.5, 4.0 MPa (ISO5752 1 Series)
Please refer to table 6.1~6.2
Body Material: Please refer to table1 Please refer to figure 3 for Operated Temp. &Pressure Range

Bonnet Type: STD type^^-46 C~200 C 200 C~300 C
Radiation fin type^^300 C~530 C
(Please pay attention to the different Temp. &Pressure Range of material)
Packing Material: PTFE V-ring compound packing\graphite compound packing\
Graphite packing,
Operating Temp. &Pressure range is shown in table 2, figure2
Seal Gasket: Spiral wound gasket(PTFE+316\Flexible Graphite+316),
Graphite with metal gasket(Graphite+316\Graphite+304).

Valve Trim
Plug Type: Parabolic column plug
Flow Characteristic: EQ%\Linearity\Quickly opening(Please refer to figure4)
Trim Material: Please refer to table 3 for STD material assembly, operated Temp. &Pressure Range.

Actuator
Type: Multi-spring diaphragm
Air Supply: Max. 6bar
Ambient Temp.: -20 C+80 C
Spring range: As shown in Table 5.1~5.2
Air Connection: G1/8(SA1); G1/4(SA2); G3/4(SA3)
STD Specification: As shown in Table 5.1~5.2.

Accessory
Positioner, Filter-regulator valve, Solenoid valve, Limit switch,
Valve position Transmitter, Booster relay, Lock-valve, Handwheel, etc.

Action
Air to open, Air to close

Performance
Range ability: 50: 1
Seat leakage: Metal seal is according to ANSI B16.104 ClassIV
Soft seal is according to ANSI B16.104 ClassVI
Hysteresis: 3%(Without Positioner) 1%(With Positioner)
Linearity: ± 5%(Without Positioner) ± 1%(With Positioner)
Rated CV: As shown in table 4
Allowable pressure differential: As shown in table 5.1~5.2
Figure Size: As shown in figure5, table 6.1~6.2
Weight of product: As shown in table 6.1~6.2.

Specifications:
Special inspection
Flow characteristic test, material test, low temperature test, steam test, non-damages test.
Copper-free treatment
Non-standard painting
Dust and sand proof

Vacuum service
Tropical area proof
Completely oil-free, water-free treatment
Special air piping and fitting
Strong corrosion proof
Stainless steel bolt and nut for exposed parts
Cold area proof
Body Assembly Structure.